3. Experiment Method
A measurement method of sample of powder form is an x-ray diffractometor(Fig. 9).
Fig. 9. An x-ray diffractometer.
3.1. Making of Sample Powder
A Sample is made a powder form. A diameter of powder has good reproducibility as smaller. But generally 10~35μm is a suitable size of sample. We must caution a deterioration by air, gas, humidity and pouri
Ceramic Capacitor)
↓
휴대폰, 개인용 PC, digital display 등 set의 전자 회로에서 수동부품의 60%를 차지하고 있음
연구배경
전기,전자 제품의 소형화 경량화 진행
→ MLCC도 소형화, 고용량화 진행
고유전율 유전체의 개발 · 초박층 기술
→ 초고용량 MLCC 개발
중략
Powder Fabrication (파우더 합성)
파
powder가 도포된 스크린에 영상형성
스크린은 기울여서 볼 수도 있으며 stereomicroscope를 이용하여 더욱 확대된 영상 관찰 가능
Ring pattern
- 전자빔에 의해서 조사된 서로 다른 결정학적 방향을 가진 입자들이 각각 Bragg's law 를 만족하며 전자들을 회절 시킬 때 발생
화학증착방법(CVD) 이나 electrod
powder, rubber, wax, metal, wood, paper, and so on (about 30 kinds of material). The materials that have various colors is made and commercialized and the one that is possible for electroplating on it is commercialized too. After the technology for 3D printing is evolved, the price of the materials for 3D printing ink may go down and it causes more and more supply of 3D printer for individual per
uses a laser as the power source to sinter powdered material (typically metal).
The laser selectively fuses powdered material by scanning cross-sections generated from a 3-D digital description of the part.
After each cross-section is scanned, the powder bed is lowered by one layer thickness, a new layer of material is applied on top, and the process is repeated until the part is completed.